STOP LIGHT SWITCH INSTALLATION

PROCEDURE


  1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. Attach the 2 claws to install a new stop light switch mounting adjuster.

  2. INSTALL STOP LIGHT SWITCH ASSEMBLY

    A002MEFE02
    Text in Illustration
    *1 Brake Pedal
    *2 Stop Light Switch Mounting Adjuster
    *3 Stop Light Switch Assembly

    1. Install the stop light switch assembly to the adjuster until the switch body slightly touches the brake pedal.

      Note

      Do not depress the brake pedal.

    2. A002N67E02
      Text in Illustration
      *1 Shaft
      *2 1.5 to 2.5 mm (0.0590 to 0.0984 in.)
      *3 Stop Light Switch Assembly

      Rotate the stop light switch assembly clockwise so that the clearance is between 1.5 and 2.5 mm (0.0590 to 0.0984 in.) as shown in the illustration.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

      Note

      Do not depress the brake pedal.

    3. Check the stop light switch assembly clearance.

      Stop light switch clearance
      1.5 to 2.5 mm (0.0590 to 0.0984 in.)

    4. Connect the connector to the stop light switch assembly.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here