HEADLIGHT ASSEMBLY(for HID Headlight) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH

    A002MT7

    1. Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow in the illustration to separate the headlight light control ECU sub-assembly LH from the headlight unit.

      Note


      • Do not apply excessive force using a tool.

      • Do not damage the headlight gasket or allow it to become contaminated with foreign matter. If the headlight gasket is damaged or contaminated, water may get into the headlight assembly, resulting in a malfunction of the headlight light control ECU sub-assembly LH.

    2. A002NIC

      Turn the headlight light control ECU sub-assembly socket in the direction indicated by the arrow in the illustration to remove the headlight light control ECU sub-assembly LH.

      CAUTION:

      Do not pull the headlight light control ECU sub-assembly LH with the socket connected.

  2. REMOVE HEADLIGHT GASKET

    A002LHO

    1. Remove the headlight gasket from the headlight light control ECU sub-assembly LH.

  3. REMOVE DISCHARGE HEADLIGHT BULB

    A002O9DE02

    1. Release the set spring lock in the order shown in the illustration and remove the discharge headlight bulb.

      Note

      Do not touch the discharge headlight bulb glass.

  4. REMOVE FRONT TURN SIGNAL LIGHT SOCKET

    A002LS8

    1. Turn the front turn signal light socket in the direction indicated by the arrow to remove it.

  5. REMOVE FRONT TURN SIGNAL LIGHT BULB

    A002QPZ

    1. Remove the front turn signal light bulb from the front turn signal light socket.