RAIN SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL RAIN SENSOR

    Note

    If there are problems with the silicon mixture, replace the rain sensor.


    1. Clean the surface of the windshield glass that contacts the rain sensor.

    2. When replacing the rain sensor with a new one:

      Remove the protective cover on the rain sensor.

      Note

      Do not touch the silicon mixture directly with a finger.

    3. A002LWN

      Connect the connector.

      Note

      Do not touch the silicon mixture directly with a finger.

    4. A002QM0

      Attach the 2 claws to install the rain sensor as shown in the illustration.

      Note

      Make sure that there are no air bubbles between the silicon mixture and windshield glass.

  2. INSTALL NO. 2 RAIN SENSOR COVER


    1. A002LSY

      Using a screwdriver, attach the 2 claws to install the No. 2 rain sensor cover.

  3. INSTALL NO. 1 RAIN SENSOR COVER


    1. A002MZY

      Attach the 2 claws to connect the No. 1 rain sensor cover.

      Note

      Be careful not to damage the No. 1 rain sensor cover.

    2. A002NM3

      Attach the 3 claws to install the No. 1 rain sensor cover.