WIPER ECU(for LHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  5. REMOVE ECU INTEGRATION BOX RH


    1. A002MPR

      Detach the clamp.

    2. Disconnect each connector.

    3. A002M43

      Remove the 2 nuts and bolt, and ECU integration box RH.

  6. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY


    1. A002M46

      Detach the 2 claws and remove the windshield wiper relay assembly.