WASHER MOTOR(for Front Side) INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. Remove the washer jar.

    2. Disconnect the windshield washer motor and pump connector.

      Tech Tips

      Make sure that the windshield washer motor and pump is installed to the washer jar.

    3. Fill the washer jar with washer fluid.

    4. A002LIJ

      Connect the positive (+) lead of the battery to terminal 1 of the windshield washer motor and pump, and the negative (-) lead to terminal 2.

    5. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the washer motor and pump assembly.