BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. A002LU6E06

      w/ Entry and Start System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (UL) - 2 (L) Lock switch pushed Below 1 Ω

      1 (UL) - 2 (L)

      3 (B) - 2 (L)

      		 Lock switch and open switch not pushed 10 kΩ or higher
      3 (B) - 2 (L) Open switch pushed Below 1 Ω

      • If the result is not as specified, replace the back door opener switch assembly.

    2. A002LV6E04
      w/o Entry and Start System
      *1 Open Switch
      *2 Not pushed
      *3 Pushed
      *4 Component without harness connected: (Back Door Opener Switch)

      w/o Entry and Start System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (B) - 2 (L) Open switch pushed Below 1 Ω
      3 (B) - 2 (L) Open switch not pushed 10 kΩ or higher

      • If the result is not as specified, replace the back door opener switch assembly.