BACK DOOR DISASSEMBLY

PROCEDURE

1. REMOVE CENTER BACK DOOR GARNISH

   
   

   1. 

      Detach the 4 clips and 4 claws, and remove the center back door garnish.

2. REMOVE CENTER STOP LIGHT ASSEMBLY

   Click here

3. REMOVE BACK DOOR SIDE GARNISH LH

   
   

   1. 

      Detach the 2 clips and claw, and remove the back door side garnish.

4. REMOVE BACK DOOR SIDE GARNISH RH

   
   

   1. 

      Detach the 2 clips and claw, and remove the back door side garnish.

5. REMOVE BACK DOOR INSIDE HANDLE

   
   

   1. 

      Using moulding remover D, detach the 4 claws and remove the back door inside handle.

6. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

   
   

   1. 

      Detach the clip.

   2. 

      Detach the 12 clips and remove the back door trim board.

7. REMOVE NO. 2 BACK DOOR PANEL PROTECTOR

   Click here

8. REMOVE NO. 1 BACK DOOR PANEL PROTECTOR

   Click here

9. REMOVE REAR SPOILER SUB-ASSEMBLY

   Click here

10. REMOVE REAR WASHER NOZZLE

    Click here

11. REMOVE REAR WIPER ARM

    Click here

12. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY

    Click here

13. REMOVE REAR WIPER MOTOR GROMMET

    Click here

14. REMOVE BACK DOOR LOCK ASSEMBLY

    Click here

15. REMOVE BACK DOOR OUTSIDE GARNISH

    Click here

16. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    Click here

17. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

18. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

    Click here

19. REMOVE BACK DOOR STAY ASSEMBLY LH

    Click here

20. REMOVE BACK DOOR STAY ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

21. REMOVE UPPER BACK DOOR DAMPER STAY BRACKET LH

    Click here

22. REMOVE UPPER BACK DOOR DAMPER STAY BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

23. REMOVE BACK DOOR STAY BOLT (for LH Side)

    Click here

24. REMOVE BACK DOOR STAY BOLT (for RH Side)

    Tech Tips

    Use the same procedure described for the LH side.