QUARTER WINDOW GLASS REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

2. REMOVE NO. 1 DECK BOARD (w/o Rear No. 2 Seat)

   Click here

3. REMOVE NO. 2 DECK BOARD (w/o Rear No. 2 Seat)

   Click here

4. REMOVE FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)

   Click here

5. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)

   Click here

6. REMOVE LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)

   Click here

7. REMOVE DECK FLOOR BOX LH (w/o Rear No. 2 Seat)

   Click here

8. REMOVE DECK FLOOR BOX RH (w/o Rear No. 2 Seat)

   Click here

9. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat, w/ Spare Tire)

   Click here

10. REMOVE DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

11. REMOVE LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)

    Click here

12. REMOVE DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)

    Click here

13. REMOVE DECK FLOOR BOX LH (w/ Rear No. 2 Seat)

    Click here

14. REMOVE DECK FLOOR BOX RH (w/ Rear No. 2 Seat)

    Click here

15. REMOVE DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)

    Click here

16. REMOVE DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)

    Click here

17. REMOVE REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)

    Click here

18. REMOVE REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)

    Click here

19. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

20. REMOVE REAR DECK TRIM COVER

    Click here

21. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

22. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

23. REMOVE FRONT DECK SIDE TRIM COVER LH

    Click here

24. REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    Click here

25. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

27. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

28. REMOVE QUARTER WINDOW ASSEMBLY LH

    

    Text in Illustration

    *1	Protective Tape

    Tech Tips

    Apply protective tape to the outer surface of the vehicle body to prevent scratches.

    Note

    When separating the quarter window from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.

    
    

    1. Disconnect the connectors.

    2. Using a knife, cut off the moulding as shown in the illustration.

       

       Text in Illustration

       *1

       Cut

       -

       -

       Note

       Be careful not to damage the vehicle body.

    3. 

       Text in Illustration

       *1	Piano Wire
       *2	Spacer

       From the interior, insert a piano wire between the vehicle body and quarter window as shown in the illustration.

    4. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    5. Cut through the adhesive by pulling the piano wire around the quarter window.

       Note

       Leave as much adhesive on the vehicle body as possible when removing the quarter window.

    6. Detach the 2 clips and remove the quarter window.

29. REMOVE QUARTER WINDOW MOULDING LH

    
    

    1. Using a scraper, remove the moulding.

       Note

       
       

       • Be careful not to damage the quarter window.

       • Be sure to replace the quarter window moulding with a new one.

30. REMOVE QUARTER WINDOW GLASS LH SPACER

    
    

    1. Using a scraper, remove the spacer.

       Note

       
       

       • Be careful not to damage the quarter window.

       • Be sure to replace the quarter window spacer with new one.

31. CLEAN VEHICLE BODY

    
    
    1. 

       Text in Illustration

       *1	Adhesive
       *2	Vehicle Body

       Clean and shape the contact surface of the vehicle body.

       
       

       1. On the contact surface of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.

          Note

          Be careful not to damage the vehicle body.

          Tech Tips

          Leave as much adhesive on the vehicle body as possible.

       2. Clean the contact surface of the vehicle body with cleaner.