ROOF SUNSHADE REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH


    1. Remove the curtain shield airbag assembly LH Click here.

  4. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE WIRE HARNESS CLAMP


    1. A002PSJ

      Cut off the wire harness clamp.

  6. REMOVE CONNECTOR WIRE


    1. A002QF8

      Detach the 4 connector wire clamps.

    2. Disconnect the 2 connectors and remove the connector wire.

  7. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY


    1. Remove the 9 nuts and 5 bolts.

      A002OIU