ROOF HEADLINING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER LH (w/ Rear No. 1 Seat, w/ Rear No. 2 Seat)

    A002MA5

    1. Attach the claw and guide to install the rear No. 2 seat shoulder belt hanger.

  2. INSTALL REAR NO. 2 SEAT SHOULDER BELT HANGER RH (w/ Rear No. 1 Seat, w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR SEAT SHOULDER BELT HANGER LH (w/ Rear No. 1 Seat)

    A002MA5

    1. Attach the claw and guide to install the rear seat shoulder belt hanger.

  4. INSTALL REAR SEAT SHOULDER BELT HANGER RH (w/ Rear No. 1 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL NO. 1 ROOF SIDE INNER GARNISH CAP (w/o Rear No. 1 Seat, w/o Rear No. 2 Seat)

    A002OAC

    Tech Tips

    Use the same procedure for all the No. 1 roof side inner garnish caps.


    1. Attach the 2 claws to install the No. 1 roof side inner garnish cap.

  6. INSTALL REAR DECK TRIM CLIP (w/o Rear No. 1 Seat)

    A002LHS

    Tech Tips

    Use the same procedure to install the rear deck trim clip on the other side.


    1. Attach the claw and guide to install the rear deck trim clip.

  7. INSTALL DECK SIDE TRIM COVER LH (w/o Rear No. 2 Seat)

    A002NCL

    1. Install the deck side trim cover with the 2 screws.

  8. INSTALL DECK SIDE TRIM COVER RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL NO. 1 CUP HOLDER

    A002NGE

    Tech Tips

    Use the same procedure to install the No. 1 cup holder on the other side.


    1. Attach the 3 claws and 2 guides to install the No. 1 cup holder.

  10. INSTALL DECK TRIM SIDE BELT HOLE COVER LH (w/o Rear No. 2 Seat)

    A002N94

    1. Slide the deck trim side belt hole cover in the direction indicated by the arrow in the illustration and attach the 2 claws and 6 guides to install it.

  11. INSTALL DECK TRIM SIDE BELT HOLE COVER RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL NO. 1 DECK BOARD BRACKET LH (w/o Rear No. 2 Seat)

    A002NDR

    1. Install the No. 1 deck board bracket with the 2 screws.

  13. INSTALL NO. 1 DECK BOARD BRACKET RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL REAR NO. 3 SIDE RAIL SPACER LH (w/ Curtain Shield Airbag)

    A002MUG

    1. Attach the 2 claws to install the rear No. 3 side rail spacer.

  15. INSTALL REAR NO. 3 SIDE RAIL SPACER RH (w/ Curtain Shield Airbag)

    Tech Tips

    Use the same procedure described for the LH side.

  16. INSTALL REAR NO. 2 SIDE RAIL SPACER LH (w/o Rear No. 2 Seat, w/o Curtain Shield Airbag)

    A002LN0

    1. Attach the 2 claws to install the rear No. 2 side rail spacer.

  17. INSTALL REAR NO. 2 SIDE RAIL SPACER RH (w/o Rear No. 2 Seat, w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure described for the LH side.

  18. INSTALL REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

    A002Q0U

    1. Attach the 4 claws to install the rear side rail spacer.

  19. INSTALL REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure described for the LH side.

  20. INSTALL FRONT SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

    A002QBR

    1. Attach the 4 claws to install the front side rail spacer.

  21. INSTALL FRONT SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

    Tech Tips

    Use the same procedure described for the LH side.

  22. INSTALL SHOULDER BELT ANCHOR PLATE LH

    A002OBX

    1. Attach the 5 claws and 3 guides to install the shoulder belt anchor plate.

  23. INSTALL SHOULDER BELT ANCHOR PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  24. INSTALL REAR DOOR SCUFF PANEL LH

    A002O3Y

    1. Attach the 5 claws and guide to install the rear door scuff panel.

  25. INSTALL REAR DOOR SCUFF PANEL RH

    Tech Tips

    Use the same procedure described for the LH side.

  26. INSTALL REAR DOOR SCUFF PLATE OUTSIDE LH

    A002N93

    1. Attach the 3 clips and 2 guides to install the rear door scuff plate outside.

  27. INSTALL REAR DOOR SCUFF PLATE OUTSIDE RH

    Tech Tips

    Use the same procedure described for the LH side.

  28. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE

    A002MQR

    Tech Tips

    Use the same procedure to install the front door scuff plate outside on the other side.


    1. Attach the 3 clips and 2 guides to install the front door scuff plate outside.

  29. INSTALL ROOF HEADLINING ASSEMBLY

    A002NXS

    Tech Tips

    Before installing the roof headlining, move the front seats and rear No. 1 seat to the positions shown in the illustration.


    1. A002PE1

      Place the roof headlining into the vehicle through the back door.

      Note

      Be careful not to damage the roof headlining when placing it in the cabin.

    2. w/o Roof Sunshade System:


      1. Install the roof headlining with the 6 clips.

        A002PWN

    3. w/ Roof Sunshade System:


      1. Attach the 2 guides and 11 fasteners to install the headlining.

      2. Install the 3 clips.

        A002MRDE02
        Text in Illustration
        *1 Guide *2 Fastener

    4. for LHD:


      1. A002NGF

        Connect the 2 connectors and attach the 2 clamps.

    5. for RHD:


      1. A002N2N

        Connect the connector.

      2. A002NVK

        Connect the connector and attach the 2 clamps.

    6. A002PG6

      Attach the 4 clamps to the front pillar LH.

    7. A002MSGE01

      Connect the 2 connectors and attach the clamp to the rear pillar RH.

    8. Install the bolt, and then align the No. 2 antenna cord with the cutout in the roof headlining and install the No. 2 antenna cord to the roof headlining.

      Text in Illustration
      *1 Roof Headlining Cutout
    9. A002NP8

      Connect the connector and attach the 3 clamps to the front pillar RH.

    10. A002P12E01
      Text in Illustration
      *A w/ EC Mirror

      w/ Pre-collision System:

      Connect the connectors.

    11. A002N3U

      w/ Rain Sensor:

      Connect the rain sensor connector.

    12. A002QVV

      w/o Pre-collision System, w/ EC Mirror:

      Connect the EC mirror connector.

  30. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Install the instrument panel safety pad sub-assembly Click here.

  31. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

    A002N3N

    1. Attach the 2 hinges to install the glove compartment door.

    2. A002MSFE02

      Attach the glove compartment door stopper to the glove compartment door as shown in the illustration.

    3. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the glove compartment door to engage the 2 stoppers.

      Text in Illustration
      *1 Stopper

  32. INSTALL FUSE BOX OPENING COVER (for LHD)

    Click here

  33. INSTALL REAR ASSIST GRIP ASSEMBLY

    A002O6O

    Tech Tips

    Use the same procedure for the other rear assist grip.


    1. Assemble the rear assist grip as shown in the illustration.

    2. A002LSK

      Install the rear assist grip.

  34. INSTALL ASSIST GRIP ASSEMBLY

    A002M9X

    Tech Tips

    Use the same procedure for the other assist grip.


    1. Assemble the assist grip as shown in the illustration.

    2. A002PFT

      Install the assist grip.

  35. INSTALL VISOR HOLDER

    A002N1R

    Tech Tips

    Use the same procedure to install the visor holder on the other side


    1. Attach the 2 claws.

    2. Push in the visor holder as shown in the illustration.

  36. INSTALL VISOR ASSEMBLY LH

    A002MCF

    1. Attach the 2 clips to install the visor.

  37. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  38. INSTALL PRE-COLLISION CITY COVER (w/ Pre-collision System)

    Click here

  39. INSTALL PRE-COLLISION CITY COVER 2ND (w/ Pre-collision System)

    Click here

  40. INSTALL RAIN SENSOR COVER (w/ Rain Sensor)

    Click here

  41. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System, w/ EC Mirror)

    Click here

  42. INSTALL SEAT BELT ANCHOR COVER

    A002NRD

    1. Attach the 2 claws to install the seat belt anchor cover.

    2. Install the 2 screws.

  43. INSTALL MAP LIGHT ASSEMBLY

    A002N8E

    1. Connect the connector.

    2. Attach the 4 clips to install the map light.

  44. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    A002PGG

    1. Attach the 7 clips to install the inner roof side garnish.

    2. w/ Rear No. 1 Seat:


      1. A002OY1

        Install the rear No. 1 seat belt shoulder anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      2. A002QQW

        Attach the 2 claws to close the rear No. 1 seat belt shoulder anchor cover.

    3. w/ Rear No. 2 Seat:


      1. A002QZ4

        Install the rear No. 2 seat belt shoulder anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      2. A002N4M

        Attach the 2 claws to close the rear No. 2 seat belt shoulder anchor cover.

  45. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  46. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Connect the connector.

    2. Attach the 6 clips and 7 claws to install the deck trim side panel.

    3. Install the 2 bolts.

      A002LVU
    4. A002M7D

      w/ Rear No. 1 Seat:

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    5. A002QH2

      w/ Rear No. 2 Seat:

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  47. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Attach the 6 clips and 7 claws to install the deck trim side panel.

    2. Install the 2 bolts.

      A002OMO
    3. A002NT4

      w/ Rear No. 1 Seat:

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. A002NZV

      w/ Rear No. 2 Seat:

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  48. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    A002NKK

    Tech Tips

    Use the same procedure for all the luggage hold belt strikers.


    1. Install the luggage hold belt striker with the bolt.

  49. INSTALL DECK TRIM SIDE SERVICE HOLE COVER

    A002QHD

    Tech Tips

    Use the same procedure to install the deck trim side service hole cover on the other side.


    1. Attach the 4 claws and 2 guides to install the deck trim side service hole cover.

  50. INSTALL FRONT DECK SIDE TRIM COVER LH

    A002NAY

    1. Attach the 2 claws to install the front deck side trim cover.

  51. INSTALL FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  52. INSTALL CENTER PILLAR GARNISH LH

    A002N23

    1. Pass the front seat outer belt floor anchor through the center pillar garnish.

    2. Attach the clip to install the center pillar garnish.

    3. Install the 2 screws.

    4. A002OUW

      Install the front seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  53. INSTALL CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  54. INSTALL LAP BELT OUTER ANCHOR COVER

    A002O9J

    Tech Tips

    Use the same procedure for the other lap belt outer anchor cover.


    1. Attach the 3 claws to install the lap belt outer anchor cover.

  55. INSTALL NO. 2 FLOOR BOARD


    1. Install the No. 2 floor board.

  56. INSTALL NO. 1 FLOOR BOARD


    1. Install the No. 1 floor board.

  57. INSTALL LOWER CENTER PILLAR GARNISH LH

    A002N7D

    1. Attach the 2 claws and 2 clips to install the lower center pillar garnish.

  58. INSTALL LOWER CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  59. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A002Q86E01
    Text in Illustration
    *1 Paint Mark
    *2 Mark Position

    1. Align the paint mark on the rear door opening trim weatherstrip with the mark position on the vehicle and install the weatherstrip as shown in the illustration.

  60. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  61. INSTALL REAR DOOR SCUFF PLATE LH

    A002N1M

    1. Attach the 9 claws and 2 clips to install the rear door scuff plate.

  62. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  63. INSTALL FRONT PILLAR GARNISH LH


    1. Remove the protective cover.

    2. Install a new front pillar garnish clip to the front pillar garnish.

      Tech Tips

      Install the front pillar garnish clip so that it faces as shown in the illustration.

      A002LR1E01
      Text in Illustration
      *a CORRECT *b INCORRECT
    3. A002OYT

      Attach the 2 claws.

    4. A002QX0E01
      *1 Front Pillar Garnish Clip

      Attach the 2 clips to install the front pillar garnish.

  64. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  65. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    A002OPVE01
    Text in Illustration
    *1 Paint Mark
    *2 Mark Position

    1. Align the paint mark on the front door opening trim weatherstrip with the mark position on the vehicle and install the weatherstrip as shown in the illustration.

  66. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  67. INSTALL COWL SIDE TRIM BOARD LH

    A002P65

    1. Attach the 2 clips and guide to install the cowl side trim board.

  68. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  69. INSTALL FRONT DOOR SCUFF PLATE LH

    A002MYL

    1. Attach the 8 claws and 2 clips to install the front door scuff plate.

  70. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  71. INSTALL REAR DECK TRIM COVER

    A002OHZ

    1. Attach the 6 claws and 4 guides to install the rear deck trim cover.

  72. INSTALL REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)


    1. Install the rear deck floor box.

      A002PFEE01
      *1 for Compact Spare Tire:
      *2 for Full Size Spare Tire:

  73. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

  74. INSTALL REAR NO. 2 SEAT TRACK COVER (w/ Rear No. 2 Seat)

    Click here

  75. INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER (w/ Rear No. 2 Seat)

    Click here

  76. INSTALL DECK TRIM SIDE BELT HOLE COVER LH (w/ Rear No. 2 Seat)

    A002ORR

    1. Slide the deck trim side belt hole cover in the direction indicated by the arrow in the illustration and attach the 2 claws and 6 guides to install it.

  77. INSTALL DECK TRIM SIDE BELT HOLE COVER RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  78. INSTALL DECK FLOOR BOX LH

    A002LJJ

    1. w/o Rear No. 2 Seat:


      1. Attach the 4 claws to install the deck floor box.

    2. A002OH6

      w/ Rear No. 2 Seat:


      1. Attach the 3 claws and guide to install the deck floor box.

      2. Install the bolt.

  79. INSTALL DECK FLOOR BOX RH

    A002PZP

    1. w/o Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

    2. A002LO4

      w/ Rear No. 2 Seat:


      1. Attach the 2 claws and guide to install the deck floor box.

      2. Install the bolt.

  80. INSTALL LOWER DECK TRIM SIDE BOARD LH (w/o Rear No. 2 Seat)

    A002O8W

    1. Attach the claw and 2 guides to install the lower deck trim side board.

  81. INSTALL LOWER DECK TRIM SIDE BOARD RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  82. INSTALL DECK RAIL COVER (w/ Rear No. 2 Seat, w/o Spare Tire)

    A002PU1

    1. Attach the 2 claws and 2 guides to install the deck rail cover.

    2. Install the clip.

  83. INSTALL LUGGAGE COMPARTMENT TRAY (w/ Rear No. 2 Seat, w/ Spare Tire)

    A002O3B

    1. Install the luggage compartment tray.

  84. INSTALL FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)

    A002LQU

    1. Install the front deck floor box with the 3 bolts.

  85. INSTALL DECK BOARD ASSEMBLY (w/ Rear No. 2 Seat)

    A002PAI

    1. Attach the 4 claws and 6 clips to install the deck board.

  86. INSTALL NO. 2 DECK BOARD (w/o Rear No. 2 Seat)

    A002MCV

    1. Attach the 5 clips to install the No. 2 deck board.

  87. INSTALL NO. 1 DECK BOARD (w/o Rear No. 2 Seat)

    A002P3T

    1. Install the No. 1 deck board.

  88. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A002NW4

    1. Install the tonneau cover.

  89. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.