HEATER ASSEMBLY(w/ Combustion Type Power Heater) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE FRONT WIPER ARM HEAD CAP

    Click here

  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

    Click here

  4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

    Click here

  5. REMOVE HOOD TO COWL TOP SEAL

    Click here

  6. REMOVE COWL TOP VENTILATOR LOUVER LH

    Click here

  7. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  8. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  9. REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for DPF)

    Click here

  10. REMOVE OUTER COWL TOP PANEL

    Click here

  11. REMOVE AIR DUCT


    1. A002QVY

      Remove the clip and air duct.

  12. REMOVE NO. 1 EXHAUST PIPE SUB-ASSEMBLY


    1. A002N7T

      Remove the 3 nuts and No. 1 exhaust pipe sub-assembly.

  13. REMOVE HEATER WITH EXHAUST PIPE ASSEMBLY

    A002PEW

    1. Disconnect the connector.

    2. Using pliers, grip the claws of the clips, slide the 3 clips and disconnect the 3 hoses.

    3. Detach the clamp.

    4. A002NB0

      Remove the 3 nuts and heater with exhaust pipe assembly.