COMPRESSOR(for ZR Series Engine) INSPECTION

PROCEDURE


  1. INSPECT COMPRESSOR ASSEMBLY WITH PULLEY (A/C COMPRESSOR SOLENOID)


    1. A002N11E02
      Text in Illustration
      *1

      Component without harness connected

      (Compressor Assembly with Pulley)

      Measure the result according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      C10-2 (SOL+) - C10-1 (SOL-) 20°C (68°F) 10 to 11 Ω

      If the result is not as specified, replace the compressor assembly with pulley.