PTC HEATER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT QUICK HEATER ASSEMBLY


    1. A002QTYE01
      Text in Illustration
      *1

      Component without harness connected

      (Quick Heater Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A14-1 (B) - A15-1 (E) Always Below 1 kΩ
      A14-2 (B) - A15-2 (E) Always
      A14-2 (B) - A15-1 (E) Always
      A14-3 (B) - A15-2 (E) Always

      If the result is not as specified, replace the quick heater assembly.