FRONT BLOWER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY (w/o PTC Heater)


    1. A002OKR

      Install the motor with the 3 screws.

    2. Connect the connector.

  2. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY (w/ PTC Heater)


    1. A002OX8E03
      Text in Illustration
      *1 Quick Heater Connector Screw

      Install the motor with the 3 screws.

    2. Connect the connector.

    3. Install the quick heater connector screw.

  3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here