FRONT BLOWER MOTOR REMOVAL

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY (w/o PTC Heater)


    1. A002OKR

      Disconnect the connector.

    2. Remove the 3 screws and motor.

  3. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY (w/ PTC Heater)


    1. A002OX8E03
      Text in Illustration
      *1 Quick Heater Connector Screw

      Remove the quick heater connector screw.

    2. Disconnect the connector.

    3. Remove the 3 screws and motor.