REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY (for LH Side)

    A002LPBE02
    Text in Illustration
    *1

    Component without harness connected

    (Rear Seat Inner Belt (for LH Side))

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2

      Seat belt fastened

      (Buckle switch is on)

      		 1 MΩ or higher
      1 - 2

      Seat belt unfastened

      (Buckle switch is off)

      		 Below 1 Ω

      If the result is not as specified, replace the inner belt.