CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH
Align the outer belt positioning holes with the 2 claws and install the retractor of the outer belt with the bolt as shown in the illustration.
Install the rear No. 2 seat outer belt shoulder anchor with the bolt.
Attach the 2 claws to close the rear No. 2 seat outer belt shoulder anchor cover.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH
| *1 | Protruding Part |
Connect the rear No. 2 seat outer belt anchor with the bolt.
Note
Do not allow the anchor part of the seat outer belt to overlap the protruding parts of the vehicle body.
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
INSTALL DECK TRIM SIDE SERVICE HOLE COVER
INSTALL FRONT DECK SIDE TRIM COVER LH
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL REAR DECK TRIM COVER
INSTALL REAR NO. 2 SEAT ASSEMBLY
INSTALL REAR NO. 2 SEAT TRACK COVER
INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER
INSTALL DECK TRIM SIDE BELT HOLE COVER LH
INSTALL DECK TRIM SIDE BELT HOLE COVER RH
INSTALL DECK FLOOR BOX LH
INSTALL DECK FLOOR BOX RH
INSTALL DECK RAIL COVER (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT TRAY (w/ Spare Tire)
INSTALL DECK BOARD ASSEMBLY