REAR CENTER SEAT ASSEMBLY(for Rear No. 1 Seat) REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL REAR CENTER NO. 1 SEATBACK FRAME SUB-ASSEMBLY


    1. Temporarily install the rear center No. 1 seatback frame sub-assembly with the 4 bolts.

    2. Tighten the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL NO. 2 REAR SEAT LOCK CONTROL CABLE

    A002MXQE02

    1. Install the No. 2 rear seat lock control cable in the order shown in the illustration.

    2. Attach the clamp of the cable end.

  3. INSTALL NO. 1 REAR SEAT LOCK CONTROL CABLE

    A002LRCE03
    Text in Illustration
    *1 Cable Tie
    *2 Clamp

    1. Install the No. 1 rear seat lock control cable in the order shown in the illustration.

    2. Attach the clamp of the cable end.

    3. Install a new cable tie.

    4. A002MDOE03
      Text in Illustration
      *a Cut Here
      *b 5 mm (0.20 in.)
      *c Correct
      *d Incorrect

      Cut off the end of the cable tie as shown in the illustration.

      Tech Tips

      Make sure that the end of the cable tie faces the seatback board.

  4. INSTALL CENTER SEAT CUSHION FRAME SUB-ASSEMBLY


    1. Temporarily install the center seat cushion frame sub-assembly with the 2 bolts.

    2. Using a T45 "TORX" socket wrench, temporarily install the 2 spacers with the 2 "TORX" bolts.

    3. Using a T45 "TORX" socket wrench, tighten the 2 "TORX" bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    4. Tighten the 2 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  5. INSTALL REAR SEATBACK WITH COVER PAD SUB-ASSEMBLY


    1. A002POB

      Install the rear seatback with cover pad sub-assembly.

    2. A002QDR

      Attach the 2 hooks.

  6. INSTALL REAR SEAT HEADREST SUPPORT

    A002NUR

    1. Attach the 4 claws to install the 2 rear headrest supports.

  7. INSTALL REAR SEATBACK HINGE COVER


    1. A002LRA

      Attach the 3 claws to install the rear seatback hinge cover to the rear center No. 1 seat armrest bracket.

    2. A002PEC

      Install the hinge cover together with the rear center No. 1 seat armrest bracket and the 2 bushes with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  8. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY


    1. A002O4C

      Install the rear center seat armrest assembly with the 2 nuts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  9. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY


    1. A002NBC

      Attach the 2 hooks.

    2. Attach the 4 claws.

    3. Attach the 4 hooks to install the rear seatback board sub-assembly.

  10. INSTALL REAR CENTER BACK LOCK CONTROL LEVER


    1. A002P3PE08

      Connect the 2 cables in the order shown in the illustration.

    2. Attach the 2 clamps of the cable ends.

      Text in Illustration
      *a Red Colored
      *b Blue Colored
    3. A002MGR

      Attach the 2 claws to install the rear center back lock control lever.

    4. Install the screw.

  11. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    1. A002MJ0E01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the center seat cushion cover sub-assembly to the rear center seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A002LWDE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, attach the center seat cushion cover sub-assembly to the rear center seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  12. INSTALL REAR CENTER SEAT CUSHION COVER WITH PAD


    1. Attach the 5 hooks to install the rear center seat cushion cover with pad to the center seat cushion frame sub-assembly.

    2. Using hog ring pliers, attach the center seat cushion cover with pad to the center seat cushion frame sub-assembly with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      A002PMME01
      Text in Illustration
      *1 Hog Ring Pliers - -

    3. Close the upper part of the center seat cushion cover sub-assembly.

    4. A002LR3

      Attach the rubber band as shown in the illustration.

    5. Pass the 2 seatback cover rubber bands through the 2 seat cushion cover rubber bands.

    6. Attach the 2 seatback cover rubber bands.

      A002Q34E02
      Text in Illustration
      *1 Seatback Cover Rubber Band *2 Seat Cushion Cover Rubber Band

    7. Attach the 4 hooks to close the cover.

      A002O5R

  13. INSTALL REAR SEAT LEG SIDE COVER

    A002P1GE03
    Text in Illustration
    *1 Hook A
    *2 Hook B

    1. Attach the hook labeled A.

    2. Attach the 2 hooks labeled B to install the rear seat leg side cover.

    3. Install the 2 screws.

  14. INSTALL REAR SEAT INNER BELT ASSEMBLY (for RH Side)

    Click here

  15. INSTALL REAR SEAT NO. 2 LEG SIDE COVER

    A002NX6E02
    Text in Illustration
    *1 Hook A
    *2 Hook B

    1. Attach the hook labeled A.

    2. Attach the 2 hooks labeled B to install the rear seat No. 2 leg side cover.

    3. Install the 2 screws.

  16. INSTALL REAR SEAT INNER BELT ASSEMBLY (for LH Side)

    Click here

  17. INSTALL REAR SEAT TRACK COVER LH

    A002PW9

    1. Attach the clip.

    2. Attach the 2 claws to install the rear seat track cover LH.

  18. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY


    1. Install the rear center seat headrest assembly.