REAR NO. 2 SEAT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRAY (w/ Spare Tire)

    Click here

  4. REMOVE DECK RAIL COVER (w/o Spare Tire)

    Click here

  5. REMOVE DECK FLOOR BOX LH

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. REMOVE DECK TRIM SIDE BELT HOLE COVER LH

    Click here

  8. REMOVE DECK TRIM SIDE BELT HOLE COVER RH

    Click here

  9. REMOVE REAR NO. 2 SEAT TRACK BRACKET COVER

    Tech Tips

    Use the same procedure to remove the cover on the other side.


    1. A002NHM

      Detach the 2 claws and remove the cover.

  10. REMOVE REAR NO. 2 SEAT TRACK COVER


    1. A002O05

      Detach the 3 claws and 2 guides, and then remove the cover.

  11. REMOVE REAR NO. 2 SEAT ASSEMBLY


    1. Disconnect the connector under the seat.

    2. Remove the 5 bolts.

      A002N31

    3. Pull the 2 straps and fold down the 2 seatbacks.

      A002MUN

    4. Remove the 2 bolts.

    5. Remove the rear No. 2 seat assembly from the vehicle.

      Note

      Be careful not to damage the vehicle body.