REAR NO. 1 SEAT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Operate the rear back lock control lever RH and raise the seatback.

    2. Remove the rear seat headrest assembly.

  2. REMOVE REAR SEAT NO. 2 LEG SIDE COVER

    A002O50E03
    Text in Illustration
    *1 Hook A
    *2 Hook B

    1. Remove the screw.

    2. Pull the cover to detach the 2 hooks labeled A.

    3. Slide the cover to detach the 3 hooks labeled B and remove the rear seat No. 2 leg side cover.

  3. REMOVE REAR SEAT TRACK COVER LH


    1. A002Q71

      Detach the 2 claws and clip.

    2. Detach the guide and remove the rear seat track cover LH.

  4. REMOVE REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY LH

    Click here

  5. REMOVE REAR SEAT LEG SIDE COVER LH

    A002LTDE01
    Text in Illustration
    *1 Hook A
    *2 Hook B

    1. Remove the 2 screws.

    2. Pull the cover to detach the 2 hooks labeled A.

    3. Slide the cover to detach the hook labeled B and remove the rear seat leg side cover LH.

  6. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD


    1. A002NO2

      Detach the 2 hooks and open the cover.

    2. Detach the 2 seatback cover rubber bands.

    3. Pull the 2 seatback cover rubber bands through the 2 seat cushion cover rubber bands.

      A002PXIE02
      Text in Illustration
      *1 Seatback Cover Rubber Band *2 Seat Cushion Cover Rubber Band
    4. A002QPC

      Detach the rubber band.

    5. A002QGH

      Remove the hog rings and roll up the separate type rear seat cushion cover.

    6. A002MH1

      Detach the 5 hooks and remove the rear No. 1 seat cushion cover with pad.

  7. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


    1. A002MIX

      Remove the hog rings.

    2. A002PRZ

      Remove the hog rings and separate type rear seat cushion cover.

  8. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY LH


    1. A002PIT

      Remove the screw and detach the 2 claws.

    2. A002LKVE03

      Detach the 2 clamps of the cable ends.

    3. Disconnect the 2 cables in the order shown in the illustration and remove the rear back lock control lever sub-assembly LH.

  9. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH


    1. A002LTW

      Remove the screw and detach the 2 claws.

    2. A002LZ6E03

      Detach the 2 clamps of the cable ends.

    3. Disconnect the 2 cables in the order shown in the illustration and remove the rear back lock control lever sub-assembly RH.

  10. REMOVE REAR NO. 1 SEATBACK BOARD


    1. Open the lower part of the rear seatback board.

    2. A002MA6E03
      Text in Illustration
      *1 Hook
      *2 Guide

      Detach the 4 claws and 2 hooks.

    3. Detach the guide and remove the rear No. 1 seatback board.

  11. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH


    1. A002MRR

      Detach the 3 hooks.

    2. A002MEV

      Detach the 2 claws.

    3. Detach the 2 hooks and remove the rear seatback board sub-assembly LH.

  12. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD


    1. A002QTDE01
      Text in Illustration
      *1 Rubber Band

      Detach the 3 hooks and 2 rubber bands.

    2. A002OG0

      Detach the 2 hooks.

    3. A002QTME02
      Text in Illustration
      *1 Hog Ring
      *2 Hook

      Remove the hog rings and detach the 2 hooks.

    4. A002QAX

      Detach the 4 claws and remove the 2 rear seat headrest supports.

    5. A002MTB

      Remove the rear No. 1 seatback cover with pad.

  13. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    1. A002QZM

      Remove the hog ring.

    2. A002MZ4

      Remove the hog rings and separate type rear seatback cover.

  14. REMOVE REAR SEATBACK LOWER COVER SUB-ASSEMBLY LH


    1. A002M7T

      Remove the hog rings.

    2. A002LWH

      Remove the hog rings and rear seatback lower cover sub-assembly LH with rear seatback lower pad.

    3. A002OGI

      Remove the lower part of the rear seatback lower cover sub-assembly LH from the rear seatback lower pad.

    4. Remove the hog rings and rear seatback lower cover sub-assembly LH.

  15. REMOVE REAR SEATBACK COVER LH


    1. A002LN7

      Detach the 2 claws and guide and remove the rear seatback cover LH.

  16. REMOVE REAR SEATBACK COVER RH


    1. A002M3G

      Detach the 2 claws and guide and remove the rear seatback cover RH.

  17. REMOVE REAR NO. 1 SEATBACK SPRING


    1. A002QLE

      Temporarily install the rear back lock control lever RH.

    2. Operate the rear back lock control lever and fold down the seatback frame.

    3. A002OAF

      Detach the 4 hooks and remove the 2 rear No. 1 seatback springs.

  18. REMOVE NO. 1 SEAT CUSHION FRAME SUB-ASSEMBLY LH


    1. A002Q51

      Operate the seatback rear back lock control lever and raise the seatback frame.

    2. Remove the rear back lock control lever RH.

    3. A002M2H

      Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts together with the 2 spacers.

    4. Remove the 2 bolts and No. 1 seat cushion frame sub-assembly LH.

  19. REMOVE RECLINING REMOTE CONTROL CABLE ASSEMBLY

    A002NFEE02

    1. Detach the clamp of the cable end.

    2. Remove the reclining remote control cable assembly in the order shown in the illustration.

  20. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    A002Q2GE02

    1. Detach the clamp of the cable end.

    2. Remove the rear No. 1 seat lock cable assembly in the order shown in the illustration.

  21. REMOVE RECLINING REMOTE CONTROL CABLE ASSEMBLY

    A002QUFE02

    1. Detach the clamp of the cable end.

    2. Remove the reclining remote control cable assembly in the order shown in the illustration.

  22. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    A002P80E02
    Text in Illustration
    *1 Cable Tie
    *2 Clamp

    1. Cut off the cable tie.

    2. Detach the clamp of the cable end.

    3. Remove the rear No. 1 seat lock cable assembly in the order shown in the illustration.

  23. REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY

    A002PZHE03
    Text in Illustration
    *1 Cable Tie
    *2 Clamp

    1. Cut off the 2 cable ties.

    2. Detach the 2 clamps of the cable ends.

    3. Remove the No. 2 seat adjuster control cable assembly in the order shown in the illustration.

  24. REMOVE NO. 1 SEATBACK FRAME SUB-ASSEMBLY LH


    1. A002PE5

      Remove the 4 bolts and No. 1 seatback frame sub-assembly LH.