FRONT SEAT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE SEAT ADJUSTER COVER CAP LH


    1. A002PJT

      Remove the 2 seat adjuster cover caps.

  2. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP


    1. A002LO0E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the vertical seat adjuster knob cap.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE VERTICAL ADJUSTING HANDLE LH


    1. A002OS9

      Remove the 2 screws and vertical adjusting handle LH.

  4. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A002ORHE01
      Text in Illustration
      *1 Protective Tape

      Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. A002OYQ

      Detach the 2 hooks and disconnect the 2 rubber bands.

    2. A002OZT

      Remove the 2 screws.

    3. Pull the front seat cushion shield LH to detach the claw.

      Text in Illustration
      A002OPC Pull
      A002ODU Slide

    4. Slide the front seat cushion shield LH to detach the 2 hooks and remove the front seat cushion shield LH.

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD LH


    1. A002OC4

      Remove the screw.

    2. Pull the front seat inner cushion shield LH to detach the hook and claw.

    3. A002MO8E02
      Text in Illustration
      *1 Wire Harness Clamp
      *2 Hook

      Slide the front seat inner cushion shield LH to detach the hook and remove the front seat inner cushion shield LH.

    4. Detach the wire harness clamp.

  7. REMOVE FRONT SEAT UNDER TRAY (w/ Under Tray)


    1. A002OZW

      Detach the 2 hooks and remove the front seat under tray.

  8. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

    Tech Tips

    Perform this procedure when it is necessary to remove and reinstall or replace the separate type front seatback assembly.


    1. Detach the 2 hooks.

      A002QG4

    2. Remove the screw and outer reclining adjuster cover LH.

      A002NVE

    3. Remove the screw and outer reclining adjuster cover RH.

    4. A002OT1E02

      for Driver Side:

      Disconnect the airbag wire harness.

      Note

      Be careful not to damage the airbag wire harness or connector.


      1. Detach the claw and disconnect the airbag connector.

      2. Detach the claw, open the seat track control cable clamp and disconnect the airbag wire harness.

        Text in Illustration
        *1 Seat Track Control Cable Clamp
        *2 Fastening Tape

      3. Detach the 2 wire harness clamps.

      4. Detach the piece of fastening tape and disconnect the airbag wire harness.

      5. A002N5D

        w/ Seat Heater System:

        Disconnect the connector.

    5. A002QKIE02

      for Front Passenger Side:

      Disconnect the airbag wire harness.

      Note

      Be careful not to damage the airbag wire harness or connector.


      1. Detach the claw and disconnect the airbag connector.

      2. Detach the claw, open the seat track control cable clamp and disconnect the airbag wire harness.

        Text in Illustration
        *1 Seat Track Control Cable Clamp
        *2 Fastening Tape

      3. Detach the 2 wire harness clamps.

      4. Detach the piece of fastening tape and disconnect the airbag wire harness.

      5. A002M70

        w/ Seat Heater System:

        Disconnect the connector.

    6. A002QCK

      Remove the 4 bolts and separate type front seatback assembly.

  9. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  10. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH


    1. A002Q2Z

      Remove the 2 front seat cushion edge protectors.

  11. REMOVE SEAT CUSHION COVER WITH PAD


    1. A002MM9E01
      Text in Illustration
      *1 Fastening Tape
      *2 Airbag Wire Harness

      Detach the piece of fastening tape and disconnect the airbag wire harness from the seat cushion cover with pad.

    2. A002OXT

      for Passenger Side:

      Detach the 2 hooks and disconnect the connector holder.

    3. w/ Seat Heater System:


      1. A002QY0

        Detach the 3 wire harness clamps.

      2. A002QG5E03

        Disconnect the connector.

    4. Detach the wire harness clamp and 3 hooks.

      Text in Illustration
      *1 Wire Harness Clamp
      *2 Hook
    5. A002NZW

      Detach the hooks and remove the seat cushion cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A002MIO

      Remove the hog rings and separate type front seat cushion cover from the front seat cushion pad.

  13. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)

    Click here

  14. REMOVE FRONT SEATBACK TABLE ASSEMBLY LH (w/ Table)


    1. A002OK3

      Remove the 4 screws and front seatback table assembly LH.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A002LXX

      Remove the hog rings from the 2 wires of the separate type front seatback cover.

    2. A002QF5E02
      Text in Illustration
      *1 Hog Ring
      *2 Hook

      Detach the 2 hooks.

    3. Remove the hog rings and detach the 2 straps of the separate type front seatback cover.

    4. A002Q5G

      Detach the 2 hooks.

    5. A002OGE

      Remove the hog rings and detach the 2 straps from the separate type front seatback pad.

    6. A002LM0

      Remove the hog rings.

    7. A002QMTE01
      Text in Illustration
      *1 Seatback Cover Bracket

      Remove the nut and detach the seatback cover bracket.

    8. A002P78

      Detach the 2 hooks.

    9. A002QFQ

      Detach the 2 hooks.

    10. A002M3A

      w/o Table:

      Remove the hog rings.

    11. A002P6P

      w/ Table:

      Remove the hog rings.

    12. A002MNME02
      Text in Illustration
      *1 Hook
      *2 Hog Ring

      Remove the hog rings and disconnect the 2 straps from the separate type front seatback pad.

    13. Detach the 2 hooks and remove the separate type front seatback cover.

      Note

      Be careful not to damage the cover.

  16. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)

    Click here

  17. REMOVE FRONT SEAT HEADREST SUPPORT


    1. A002NIX

      Remove the separate type front seatback pad.

    2. A002O2W

      Detach the 4 claws and remove the 2 front seat headrest supports.

  18. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH


    1. A002LSH

      Remove the screw.

    2. Detach the hook and remove the upper reclining adjuster inside cover LH.

  19. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  20. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH


    1. A002NNJ

      Remove the screw and lower reclining adjuster inside cover LH.

  21. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH


    1. A002OX7

      Remove the screw and front seat lower cushion shield LH.

  23. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

    Tech Tips

    Use the same procedure described for the LH side.

  24. REMOVE FRONT SEAT ADJUSTER ASSEMBLY LH


    1. A002P4D

      Detach the 5 wire harness clamps.

    2. A002OWN

      Remove the 4 bolts and front seat adjuster assembly LH from the front seatback spring sub-assembly.

  25. REMOVE SEAT TRACK CONTROL CABLE CLAMP


    1. A002ONV

      Detach the claw and remove the seat track control cable clamp.

  26. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    1. A002NFAE01

      Remove the separate type front seat cushion spring assembly from the front seat adjuster assembly LH in the order shown in the illustration.

  27. REMOVE FRONT NO. 1 SEAT CUSHION PROTECTOR


    1. A002LJ3

      Detach the 4 hooks and remove the front No. 1 seat cushion protector from the front seat cushion spring.

  28. REMOVE FRONT NO. 2 SEAT CUSHION PROTECTOR


    1. A002P6G

      Detach the 6 hooks and remove the front No. 2 seat cushion protector from the front seat cushion spring.

  29. REMOVE SEAT TRACK ADJUSTING HANDLE


    1. A002QM1

      Using a screwdriver, detach the 2 springs and remove the seat track adjusting handle from the front seat adjuster assembly LH.