PRE-COLLISION SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE


  1. CUSTOMIZE PRE-COLLISION SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS.

      Tech Tips

      The default settings of the PCS function and PCS warning sensitivity used when the ignition switch is turned to ON can be changed.


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Chassis / PCS/LDA/RSA/LVN / Utility / Customize.

      5. Select the setting by referring to the table below.

        Sensor
        Tester Display Description Default Setting ECU
        PCS Operation State Retention Setting Refer to the table below OFF 0:OFF,1:ON Pre-collision city sensor
        PCS Alarm Activation Distance Retention Setting 1 Refer to the table below OFF 0:OFF,1:ON Pre-collision city sensor
        PCS Alarm Activation Distance Retention Setting 2 Refer to the table below ON 0:OFF,1:ON Pre-collision city sensor
        PCS Alarm Activation Distance Retention Setting 3 Refer to the table below OFF 0:OFF,1:ON Pre-collision city sensor
        Customize Setting Description Setting
        PCS Operation State Retention Setting Function to maintain the pre-collision system on/off setting when the ignition switch is turned off and then ON.

        OFF: Not maintained (pre-collision system always turns on)

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 1 Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 2 Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is on.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 3 Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system if off.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained