REAR AIRBAG SENSOR(w/o Rear No. 2 Seat) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

3. REMOVE NO. 1 DECK BOARD

   Click here

4. REMOVE NO. 2 DECK BOARD

   Click here

5. REMOVE FRONT DECK FLOOR BOX

   Click here

6. REMOVE LOWER DECK TRIM SIDE BOARD LH

   Click here

7. REMOVE LOWER DECK TRIM SIDE BOARD RH

   Click here

8. REMOVE DECK FLOOR BOX LH

   Click here

9. REMOVE DECK FLOOR BOX RH

   Click here

10. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

11. REMOVE REAR DECK TRIM COVER

    Click here

12. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

14. REMOVE FRONT DECK SIDE TRIM COVER LH

    Click here

15. REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    Click here

16. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

18. REMOVE REAR AIRBAG SENSOR LH

    
    

    1. 

       Remove the bolt and rear airbag sensor.

    2. Disconnect the connector.