CURTAIN SHIELD AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)


    1. Install the curtain shield airbag with the 11 bolts.

      A002QTZE04
      Torque:
      for bolt A
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }
      for bolt B
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    2. Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)


    1. Install the curtain shield airbag with the 9 bolts.

      A002OMPE03
      Torque:
      for bolt A
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }
      for bolt B
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    2. Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  3. INSTALL ROOF HEADLINING ASSEMBLY


    1. Install the roof headlining Click here.