INNER REAR VIEW MIRROR(w/o Pre-collision System) INSTALLATION

PROCEDURE


  1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

    A002OBR

    1. Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

    2. Connect the connector.

  2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


    1. A002NJR

      Attach the 6 claws.

    2. A002M1K

      Slide the inner rear view mirror stay holder cover in the direction indicated by the arrow in the illustration and attach the 2 claws to install it.

  3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

    A002PHM

    1. Slide the inner rear view mirror in the direction indicated by the arrow in the illustration to install it.