PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work. Click here
When disconnecting the cable from the negative (-) battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected. Click here
IGNITION SWITCH EXPRESSION
Tech Tips
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (position) | Engine Switch (condition) |
|---|---|---|
| Ignition Switch off | Off | Off |
| Ignition Switch ON | ON | On (IG) |
| Ignition Switch ACC | ACC | On (ACC) |
| Engine Start | START | Start |
NOTICE FOR ARMED STATE
If the vehicle is left in the armed state for an extended period of time or in another condition that causes the battery to be fully depleted, the alarm may sound simultaneously with the recharging of the battery or the replacement of the battery with a new one.*2 If this occurs, immediately unlock the doors through a wireless unlock operation or entry unlock operation*1 to stop the alarm.
*1: w/ Entry and Start System
Tech Tips
*2: This may occur in the following situation: during active arming mode while in the armed state, the cable of the negative (-) battery terminal is disconnected and reconnected Click here.