BACK DOOR LOCK INSTALLATION

CAUTION / NOTICE / HINT

Note


  • When installing a new back door lock assembly, if there is any tape stuck to it, remove the tape.

  • When installing a new back door lock assembly, if there are any strings attached to it, cut the strings off.

PROCEDURE


  1. INSTALL BACK DOOR LOCK ASSEMBLY


    1. A002O1W

      Connect the connector.

    2. Install the back door lock assembly with the 3 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  3. INSTALL BACK DOOR INSIDE HANDLE

    Click here

  4. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  6. INSTALL CENTER BACK DOOR GARNISH

    Click here