DOOR CONTROL TRANSMITTER(w/o Entry and Start System) INSTALLATION

PROCEDURE


  1. INSTALL TRANSMITTER BATTERY


    1. A002NWJE01

      Install a new battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

  2. INSTALL TRANSMITTER HOUSING COVER


    1. A002NTK

      Install the transmitter housing cover by pressing down on it as shown in the illustration.