WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) CUSTOMIZE PARAMETERS

PROCEDURE


  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Utility / Customize.

      5. Select the setting by referring to the table below.

        Wireless Door Lock
        Display Default Content Setting
        Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON/OFF
        Wireless Control ON Function that turns the wireless door lock function on or off. ON/OFF
        Auto Lock Time 30 s Function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s/60 s/120 s

    2. Customizing with radio and display receiver assembly


      1. Turn the ignition switch to ON.

      2. Enter the following menus: Setup / Vehicle / Vehicle settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting
        Auto relock timer 30 s Function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s/60 s/120 s
        Lock/unlock feedback lights On When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. On/Off