POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE


  1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Door Lock / Utility / Customize.

      5. Select the setting by referring to the table below.

        Door Lock
        Display Default Content Setting
        Auto Lock/Shift* OFF Function that locks all the doors when the shift lever is moved from P to any position other than P while the engine is running and all the doors are closed. ON/OFF
        Auto Unlock/Shift* OFF Function that unlocks all the doors when the shift lever is moved to P from any position other than P while the ignition switch is ON. ON/OFF
        All Unlock/Open-Close OFF Function that unlocks the other doors when the driver side door is opened within 43 seconds after the ignition switch is turned off. ON/OFF

        *: except Manual Transaxle

    2. Customizing with radio and display receiver assembly


      1. Turn the ignition switch to ON.

      2. Enter the following menus: Setup / Vehicle / Vehicle settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting
        Auto lock by speed On Function that locks all doors when the vehicle speed reaches a certain level. On/Off
        Auto lock by shift from P* Off Function that locks all the doors when the shift lever is moved from P to any position other than P while the engine is running and all the doors are closed. On/Off
        Auto unlock by shift to P* Off Function that unlocks all the doors when the shift lever is moved to P from any position other than P while the ignition switch is ON. On/Off

        *: except Manual Transaxle