NETWORK GATEWAY ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL NETWORK GATEWAY ECU

   
   

   1. Install the network gateway ECU with the bolt.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

   2. Connect the connector.

2. INSTALL FUSE BOX OPENING COVER

   Click here

3. INSTALL NO. 2 SWITCH HOLE BASE

   Click here

4. INSTALL COWL SIDE TRIM BOARD RH

   Click here

5. INSTALL FRONT DOOR SCUFF PLATE RH

   Click here