NETWORK GATEWAY ECU(for LHD) REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. REMOVE NETWORK GATEWAY ECU

    A002LPJ

    1. Disconnect the connector.

    2. Remove the bolt and network gateway ECU.