READ DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Data List.
According to the display on the intelligent tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| D Door Courtesy SW | Front door courtesy light switch LH signal*1 / ON or OFF Front door courtesy light switch RH signal*2 / ON or OFF |
ON: Driver side door open OFF: Driver side door closed |
- |
| D-Door Lock Pos switch | Front door LH lock position switch signal*1 / ON or OFF Front door RH lock position switch signal*2 / ON or OFF |
ON: Driver side door unlocked OFF: Driver side door locked |
- |
| P Door Courtesy SW | Front door courtesy light switch RH signal*1 / ON or OFF Front door courtesy light switch LH signal*2 / ON or OFF |
ON: Front passenger side door open OFF: Front passenger side door closed |
- |
| P-Door Lock Pos switch | Front door RH lock position switch signal*1 / ON or OFF Front door LH lock position switch signal*2 / ON or OFF |
ON: Front passenger side door unlocked OFF: Front passenger side door locked |
- |
| RL Door Courtesy SW | Rear door courtesy light switch LH signal / ON or OFF | ON: Rear LH side door open OFF: Rear LH side door closed |
- |
| RL-Door Lock Pos switch | Rear door LH (door lock position switch) signal / ON or OFF | ON: Rear LH side door unlocked OFF: Rear LH side door locked |
- |
| RR Door Courtesy SW | Rear door courtesy light switch RH signal / ON or OFF | ON: Rear RH side door open OFF: Rear RH side door closed |
- |
| RR-Door Lock Pos switch | Rear door RH (door lock position switch) signal / ON or OFF | ON: Rear RH side door unlocked OFF: Rear RH side door locked |
- |
| Back Door Courtesy SW | Back door courtesy light switch signal / ON or OFF | ON: Back door open OFF: Back door closed |
- |
| Back Door Open | Back door lock position status / Permit or Prohibit | Permit: Back door unlocked Prohibit: Back door locked |
- |
*1: for LHD
*2: for RHD
ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Active Test.
According to the display on the intelligent tester, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Hazard | Turn signal flasher relay | ON/OFF | - |
| Wireless Buzzer | Wireless door lock buzzer | ON/OFF | - |
| Door Lock | Door lock motor | LOCK/UNLOCK | - |