NAVIGATION ANTENNA INSTALLATION

PROCEDURE


  1. INSTALL NAVIGATION ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. A002OEV

      Attach the 2 clamps to install the navigation antenna cord.

  2. INSTALL NAVIGATION ANTENNA ASSEMBLY (for LHD)


    1. A002MAF

      Install the navigation antenna with the 2 screws.

    2. Attach the 3 clamps.

    3. A002O03

      Install the heater to register duct assembly with the 2 screws.

  3. INSTALL INSTRUMENT PANEL STAY LH (for LHD)

    Click here

  4. INSTALL NAVIGATION ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. A002NMS

      Attach the 2 clamps to install the navigation antenna cord.

  5. INSTALL NAVIGATION ANTENNA ASSEMBLY (for RHD)


    1. A002PF7

      Install the navigation antenna with the 2 screws.

    2. Attach the 3 clamps.

    3. A002MRY

      Install the heater to register duct assembly with the 2 screws.

  6. INSTALL INSTRUMENT PANEL STAY RH (for RHD)

    Click here

  7. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Install the instrument panel safety pad Click here.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.