ULTRASONIC SENSOR(for Rear) INSTALLATION

PROCEDURE


  1. INSTALL ULTRASONIC SENSOR RETAINER

    Tech Tips


    • Align the slit of the ultrasonic sensor retainer with the protrusion of the rear bumper cover and install the ultrasonic sensor retainer.

    • Pay attention to the protrusions of the rear bumper cover as the orientation of the retainer changes depending on the installation position.

    • Use the same procedure for both ultrasonic sensor retainers.

    A002PUVE01
    Text in Illustration
    *a Rear View of Rear Bumper - -

    1. A002OX5E03
      Text in Illustration
      *a Slit
      *b Protrusion

      Attach the 4 claws to install the ultrasonic sensor retainer to the rear bumper cover.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  2. INSTALL ULTRASONIC SENSOR CLIP

    Tech Tips

    Use the same procedure for both ultrasonic sensor clips.


    1. A002MZ8

      Attach the claw to install the ultrasonic sensor clip.

  3. INSTALL NO. 1 ULTRASONIC SENSOR

    A002M1Q

    Tech Tips

    Use the same procedure for all ultrasonic sensors.


    1. Attach the 2 claws to install the ultrasonic sensor.

  4. INSTALL NO. 4 FLOOR WIRE


    1. When using a new rear bumper cover:

      Clean the rear bumper cover surface.

    2. When reusing the rear bumper cover:

      Wipe off any tape adhesive residue with cleaner.

    3. Attach the 2 clamps to install the No. 4 floor wire.

    4. Connect the 4 connectors.

    5. Install 3 new pieces of tape as shown in the illustration.

      Tech Tips

      Align the tape with the mark-off line of the rear bumper.

      A002OAHE01
      Text in Illustration
      *1 Tape - -

  5. INSTALL REAR BUMPER COVER

    Click here

  6. INSTALL NO. 1 FLOOR UNDER COVER

    Click here