ULTRASONIC SENSOR(for Rear) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 FLOOR UNDER COVER

    Click here

  2. REMOVE REAR BUMPER COVER

    Click here

  3. REMOVE NO. 4 FLOOR WIRE


    1. Remove the 3 pieces of tape.

    2. Disconnect the 4 connectors.

    3. Detach the 2 clamps and remove the No. 4 floor wire.

      A002OAHE01
      Text in Illustration
      *1 Tape - -

  4. REMOVE NO. 1 ULTRASONIC SENSOR

    A002M1Q

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. Detach the 2 claws and remove the No. 1 ultrasonic sensor.

  5. REMOVE ULTRASONIC SENSOR CLIP

    Tech Tips

    Use the same procedure for both ultrasonic sensor clips.


    1. A002NKYE02
      Text in Illustration
      *a Protective Tape

      Using a screwdriver, detach the claw and remove the ultrasonic sensor clip as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure for both ultrasonic sensor retainers.

    A002M2N

    1. Detach the 4 claws and remove the ultrasonic sensor retainer.