STEREO JACK ADAPTER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY

   
   

   1. 

      Attach the 2 claws to install the stereo jack adapter.

   2. 

      Connect the connector.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

3. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

   Click here

4. INSTALL FRONT NO. 1 CONSOLE BOX INSERT

   Click here

5. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)

   Click here

6. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)

   Click here

7. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)

   Click here

8. INSTALL SHIFTING HOLE COVER (for Manual Transaxle)

   Click here

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

10. INSTALL STEREO OPENING COVER WITH BRACKET (w/o Audio)

    Click here

11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)

    Click here

12. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, for Radio Receiver Type)

    Click here

13. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, for Radio Receiver Type)

    Click here

14. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

15. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

16. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.