PARKING BRAKE CABLE INSTALLATION

PROCEDURE


  1. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Install the No. 3 parking brake cable with the 4 bolts.

      A002PAW
      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    2. A002LRG

      Attach the clamp.

    3. Install the casing cap with the bolt.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    4. A002MQWE02
      Text in Illustration
      *1 Spring Clip
      *2 Projection
      *3 Casing Cap

      Attach the spring clip of the No. 3 parking brake cable to the backing plate, as shown in the illustration.

      Note


      • Make sure the spring clip passes completely through the hole of the backing plate.

      • Make sure the projection of the casing cap faces upward.

  2. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. Install the No. 2 parking brake cable with the 5 bolts.

      A002Q2O
      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    2. A002M5L

      Attach the clamp.

    3. Install the casing cap with the bolt.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    4. A002MQWE02
      Text in Illustration
      *1 Spring Clip
      *2 Projection
      *3 Casing Cap

      Attach the spring clip of the No. 2 parking brake cable to the backing plate, as shown in the illustration.

      Note


      • Make sure the spring clip passes completely through the hole of the backing plate.

      • Make sure the projection of the casing cap faces upward.

  3. INSTALL NO. 2 FRONT FLOOR HEAT INSULATOR


    1. A002OAD

      Install the No. 2 front floor heat insulator with the 3 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  4. INSTALL FRONT EXHAUST PIPE ASSEMBLY


    1. for 1ZR-FAE:

      Install the front exhaust pipe assembly Click here.

    2. for 2ZR-FAE:

      Install the front exhaust pipe assembly Click here.

    3. for 1WW:

      Install the front exhaust pipe assembly Click here.

  5. INSTALL REAR FLOOR SIDE MEMBER COVER LH (for 1ZR-FAE)

    Click here

  6. INSTALL REAR FLOOR SIDE MEMBER COVER LH (for 2ZR-FAE)

    Click here

  7. INSTALL REAR FLOOR SIDE MEMBER COVER LH (for 1WW)

    Click here

  8. INSTALL REAR FLOOR SIDE MEMBER COVER RH (for 1ZR-FAE)

    Click here

  9. INSTALL REAR FLOOR SIDE MEMBER COVER RH (for 2ZR-FAE)

    Click here

  10. INSTALL REAR FLOOR SIDE MEMBER COVER RH (for 1WW)

    Click here

  11. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Connect the No. 3 parking brake cable Click here.

  12. CONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY

    Tech Tips

    Use the same procedure described for the No. 3 parking brake cable.

  13. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

  14. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. CONNECT PARKING BRAKE CABLE


    1. A002PVPE01
      Text in Illustration
      *1 No. 2 Parking Brake Cable
      *2 No. 3 Parking Brake Cable

      Connect the No. 3 parking brake cable to the parking brake equalizer as shown in the illustration.

    2. Connect the No. 2 parking brake cable to the parking brake equalizer.

      Tech Tips

      Use the same procedure described for the No. 3 parking brake cable.

  16. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET

    Click here

  17. CHECK PARKING BRAKE LEVER TRAVEL

    Click here

  18. ADJUST PARKING BRAKE LEVER TRAVEL

    Click here

  19. INSTALL CONSOLE BOX ASSEMBLY


    1. Install the console box assembly Click here.

  20. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly LH Click here.

  21. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  23. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.

  24. INSPECT FOR EXHAUST GAS LEAK

  25. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }