PARKING BRAKE CABLE REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • w/ Navigation System for HDD:

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT SEAT ASSEMBLY LH


    1. Remove the front seat assembly LH Click here.

  4. REMOVE FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE CONSOLE BOX ASSEMBLY


    1. Remove the console box assembly Click here.

  6. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET

    Click here

  7. DISCONNECT PARKING BRAKE CABLE


    1. A002ODVE01
      Text in Illustration
      *1 No. 2 Parking Brake Cable
      *2 No. 3 Parking Brake Cable

      Disconnect the No. 3 parking brake cable from the parking brake equalizer as shown in the illustration.

    2. Disconnect the No. 2 parking brake cable from the parking brake equalizer.

      Tech Tips

      Use the same procedure described for the No. 3 parking brake cable.

  8. REMOVE REAR WHEEL

  9. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for 1ZR-FAE)

    Click here

  10. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for 2ZR-FAE)

    Click here

  11. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for 1WW)

    Click here

  12. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for 1ZR-FAE)

    Click here

  13. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for 2ZR-FAE)

    Click here

  14. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for 1WW)

    Click here

  15. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. for 1ZR-FAE:

      Remove the front exhaust pipe assembly Click here.

    2. for 2ZR-FAE:

      Remove the front exhaust pipe assembly Click here.

    3. for 1WW:

      Remove the front exhaust pipe assembly Click here.

  16. REMOVE NO. 2 FRONT FLOOR HEAT INSULATOR


    1. A002OAD

      Remove the 3 nuts and No. 2 front floor heat insulator.

  17. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

  18. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  19. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Disconnect the No. 3 parking brake cable Click here.

  20. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY

    Tech Tips

    Use the same procedure described for the No. 3 parking brake cable.

  21. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. A002M7EE01
      Text in Illustration
      *1 Spring Clip

      Detach the spring clip of the No. 2 parking brake cable from the backing plate. Then disconnect the No. 2 parking brake cable from the backing plate.

    2. A002M5L

      Remove the bolt and casing cap from the body.

    3. Detach the clamp.

    4. Remove the 5 bolts and the No. 2 parking brake cable.

      A002Q2O

  22. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A002M7EE01
      Text in Illustration
      *1 Spring Clip

      Detach the spring clip of the No. 3 parking brake cable from the backing plate. Then disconnect the No. 3 parking brake cable from the backing plate.

    2. A002LRG

      Remove the bolt and casing cap from the body.

    3. Detach the clamp.

    4. Remove the 4 bolts and the No. 3 parking brake cable.

      A002PAW