PARKING BRAKE LEVER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL PARKING BRAKE LEVER SUPPORT BRACKET


    1. A002LOF

      Install the parking brake lever support bracket with the 2 bolts.

      Torque:
      15 N*m  { 148 kgf*cm, 11 ft.*lbf }

    2. Attach the 2 clamps to the parking brake lever support bracket.

  2. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    1. A002OXK

      Install the parking brake switch to the parking brake lever with the screw.

      Torque:
      0.9 N*m  { 9 kgf*cm, 8 in.*lbf }

  3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A002M2O

      Pass the No. 1 parking brake cable through the parking brake lever.

    2. A002PP0

      Bend the parking brake lever claw.

    3. A002Q67E01
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Temporarily install the adjusting nut and the lock nut to the No. 1 parking brake cable.

  4. INSTALL PARKING BRAKE CABLE END STOPPER


    1. A002N6K

      Install the parking brake cable end stopper to the No. 1 parking brake cable.

  5. INSTALL PARKING BRAKE EQUALIZER


    1. A002N80

      Attach the 2 claws to install the parking brake equalizer to the parking brake cable end stopper.

    2. A002Q08

      Attach the 2 claws to connect the parking brake equalizer to the No. 1 parking brake cable.

  6. INSTALL PARKING BRAKE LEVER ASSEMBLY


    1. A002O1G

      Install the parking brake lever with the 2 bolts.

      Torque:
      15 N*m  { 148 kgf*cm, 11 ft.*lbf }
    2. A002OQ5

      Connect the parking brake switch connector.

  7. CONNECT PARKING BRAKE CABLE


    1. A002PVPE01
      Text in Illustration
      *1 No. 2 Parking Brake Cable
      *2 No. 3 Parking Brake Cable

      Connect the No. 3 parking brake cable to the parking brake equalizer as shown in the illustration.

    2. Connect the No. 2 parking brake cable to the parking brake equalizer.

      Tech Tips

      Use the same procedure described for the No. 3 parking brake cable.

  8. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. A002PBO

      Install the No. 2 console box mounting bracket with the 4 bolts.

      Torque:
      27 N*m  { 275 kgf*cm, 19 ft.*lbf }

    2. Install the floor carpet.

  9. CHECK PARKING BRAKE LEVER TRAVEL

    Click here

  10. ADJUST PARKING BRAKE LEVER TRAVEL

    Click here

  11. INSTALL CONSOLE BOX ASSEMBLY


    1. Install the console box assembly Click here.

  12. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly Click here.

  13. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  15. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.