REAR BRAKE FLEXIBLE HOSE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The following procedure is for the LH side.

Note

If the RH side flexible hose and LH side flexible hose are both removed from the vehicle at the same time, place an identification mark on each hose so that it can be reinstalled to its original position.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. DRAIN BRAKE FLUID

    Note

    Immediately wash off any brake fluid that comes into contact with any painted surfaces.

  3. REMOVE REAR BRAKE FLEXIBLE HOSE


    1. A002LZN

      Remove the union bolt and rear flexible hose gasket, and disconnect the rear brake flexible hose from the rear disc brake cylinder assembly.

    2. A002O7M

      Using a union nut wrench, disconnect the brake line while holding the rear brake flexible hose with a wrench.

      Note


      • Do not kink or damage the brake line.

      • Do not allow any foreign matter such as dirt or dust to enter the brake line.

    3. Remove the clip and rear brake flexible hose.