REAR BRAKE DISASSEMBLY

PROCEDURE


  1. REMOVE CYLINDER BOOT


    1. A002MFW

      Using a screwdriver, remove the cylinder boot from the piston.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Be careful not to damage the brake piston or cylinder.

  2. REMOVE REAR DISC BRAKE PISTON


    1. Place a piece of cloth between the piston and disc brake cylinder assembly.

    2. A002QK9

      Apply compressed air to remove the piston from the disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the piston when using compressed air.

      Note

      Do not allow any brake fluid to spatter.

  3. REMOVE PISTON SEAL


    1. A002Q69

      Using a screwdriver, remove the piston seal from the disc brake cylinder assembly.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DISC BRAKE BLEEDER PLUG