VSC OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT VSC OFF SWITCH


    1. A002PGCE01
      *1 Component without harness connected: (VSC OFF Switch)
      *2 Not pushed
      *3 Pushed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (E) - 6 (+) Pushed Below 1 Ω
      Not pushed 10 kΩ or higher

      If the result is not as specified, replace the VSC OFF switch.