FRONT SPEED SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT FENDER LINER LH


    1. Partially remove the front fender liner.

      Tech Tips

      It is not necessary to fully remove the fender liner. Partially remove it so that the speed sensor connector can be disconnected in a later step.

  3. REMOVE FRONT SPEED SENSOR LH


    1. A002LZ5

      Detach the connector clip.

    2. Disconnect the connector.

    3. A002M63

      Detach the sensor clip and remove the bolt and sensor clamp.

    4. A002M8T

      Detach the sensor clip and remove the bolt and sensor clamp.

    5. A002O3M

      Remove the bolt and front speed sensor from the knuckle.

      Note

      Keep the sensor tip and sensor installation hole free from foreign matter.