FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FAN AND GENERATOR V BELT

    Click here

  2. REMOVE CRANKSHAFT PULLEY


    1. A002LHU

      Remove the plug from the cylinder block.

    2. A002M91E01

      Set SST (A) to the plug hole of the cylinder block.

      SST
      PZ4TB-04951-26
    3. A002LQCE02
      Text in Illustration
      *a Groove

      Using SST (B), turn the crankshaft pulley clockwise until SST (A) fits into the groove of the flywheel with damper assembly.

      SST
      PZ4TB-04933-80

    4. Using SST (A), hold the flywheel with damper assembly.

    5. A002P02

      Using an E10 "TORX" socket wrench, remove the 4 bolts and crankshaft pulley.

  3. REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL


    1. A002LMJE01
      Text in Illustration
      *a Protective Tape

      Using a screw driver, pry out the timing gear case or timing chain case oil seal.

      Note

      Do not damage the oil seal press fit hole, crankshaft or the surface of the timing gear case or timing chain case.

      Tech Tips

      Tape the screw driver tip before use.