REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE MANUAL TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE CLUTCH COVER ASSEMBLY

    Click here

  3. REMOVE CLUTCH DISC ASSEMBLY

    Click here

  4. REMOVE FLYWHEEL WITH DAMPER ASSEMBLY


    1. A002M5VE01

      Using SST, fix the flywheel with damper assembly.

      SST
      PZ4TB-04939-38
    2. A002NB8E01

      Using SST, remove the 8 bolts and flywheel with damper assembly.

      SST
      PZ4TB-04910-18

    3. Remove SST.

    4. A002LNQ

      Remove the crankshaft position sensor plate from the crankshaft.

  5. REMOVE REAR ENGINE OIL SEAL


    1. A002P08E01
      Text in Illustration
      *a Protective Tape

      Using a screw driver, pry out the rear engine oil seal.

      Note

      Do not damage the rear engine oil seal press fit hole, crankshaft or the surface of the timing chain cover plate.

      Tech Tips

      Tape the screw driver tip before use.