DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  2. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A002LQG

      Remove the 3 clips.

    2. Detach the 4 hooks and remove the radiator support opening cover.

  3. REMOVE REAR ENGINE UNDER COVER RH


    1. A002PV5

      Remove the 5 clips and under cover RH.

  4. REMOVE V-RIBBED BELT


    1. A002N9QE02
      Text in Illustration
      *a 5 mm Hexagon Wrench
      *b Hole
      *c Gap

      Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration.

    2. Rotate the V-ribbed belt tensioner assembly clockwise to align the hole with the gap, and then insert a 5 mm hexagon wrench into the hole and gap to secure the V-ribbed belt tensioner assembly.

    3. Remove the V-ribbed belt from the V-ribbed belt tensioner assembly.