DRIVE BELT INSTALLATION

PROCEDURE


  1. INSTALL V-RIBBED BELT


    1. Temporarily install the V-ribbed belt.

  2. ADJUST V-RIBBED BELT


    1. A002QH3E01

      Turn bolt C to adjust the tension of the V-ribbed belt.

    2. Tighten bolts A and B.

      Torque:
      for bolt A
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }
      for bolt B
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

      Note

      Do not loosen bolt D.

  3. INSPECT V-RIBBED BELT

    Click here

  4. INSTALL REAR ENGINE UNDER COVER RH


    1. A002PV5

      Install the under cover RH with the 5 clips.

  5. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A002LQG

      Attach the 4 hooks to install the radiator support opening cover.

    2. Install the 3 clips.

  6. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here