ENGINE UNIT INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 VACUUM PUMP BRACKET


    1. A002OHW

      Install a new gasket and the vacuum pump bracket with the 2 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  2. INSTALL VACUUM PUMP ASSEMBLY

    Click here

  3. INSTALL IGNITION COIL ASSEMBLY

    Click here

  4. INSTALL THERMOSTAT

    Click here

  5. INSTALL WATER INLET

    Click here

  6. INSTALL WATER INLET HOSE


    1. A002NKE

      Install the water inlet hose with the 2 clamps.

  7. INSTALL WATER BY-PASS HOSE


    1. A002LMS

      Install the water by-pass hose with the clamp.

  8. INSTALL NO. 1 WATER BY-PASS PIPE


    1. A002P6C

      Install the water by-pass pipe with the 2 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  9. CONNECT NO. 3 WATER BY-PASS HOSE

    Click here

  10. INSTALL VENTILATION HOSE


    1. Install the ventilation hose to the ventilation valve.

  11. INSTALL EXHAUST MANIFOLD

    Click here

  12. INSTALL MANIFOLD STAY

    Click here

  13. INSTALL DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY

    Click here

  14. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  15. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE


    1. A002LOQ

      Apply a light coat of engine oil to a new O-ring.

    2. Install the O-ring to the dipstick guide.

    3. Install the dipstick guide with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    4. Install the engine oil level dipstick.

  16. INSTALL FUEL INJECTOR ASSEMBLY

    Click here

  17. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

    Click here

  18. INSTALL FUEL TUBE SUB-ASSEMBLY

    Click here

  19. INSTALL WIRE HARNESS CLAMP BRACKET

    Click here

  20. INSTALL AIR TUBE

    Click here

  21. INSTALL INTAKE MANIFOLD

    Click here

  22. INSTALL THROTTLE BODY ASSEMBLY

    Click here