ENGINE UNIT REMOVAL

PROCEDURE


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE INTAKE MANIFOLD

    Click here

  3. REMOVE AIR TUBE

    Click here

  4. REMOVE WIRE HARNESS CLAMP BRACKET

    Click here

  5. REMOVE FUEL TUBE SUB-ASSEMBLY

    Click here

  6. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

    Click here

  7. REMOVE FUEL INJECTOR ASSEMBLY

    Click here

  8. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. A002LOQ

      Remove the engine oil dipstick.

    2. Remove the bolt and dipstick guide.

    3. Remove the O-ring from the dipstick guide.

  9. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  10. REMOVE DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY

    Click here

  11. REMOVE MANIFOLD STAY

    Click here

  12. REMOVE EXHAUST MANIFOLD

    Click here

  13. REMOVE VENTILATION HOSE


    1. Remove the ventilation hose from the ventilation valve.

  14. DISCONNECT NO. 3 WATER BY-PASS HOSE

    Click here

  15. REMOVE WATER BY-PASS HOSE


    1. A002LMS

      Remove the clamp and water by-pass hose.

  16. REMOVE WATER INLET HOSE


    1. A002NKE

      Remove the 2 clamps and water inlet hose.

  17. REMOVE NO. 1 WATER BY-PASS PIPE


    1. A002P6C

      Remove the 2 bolts and water by-pass pipe.

  18. REMOVE WATER INLET

    Click here

  19. REMOVE THERMOSTAT

    Click here

  20. REMOVE IGNITION COIL ASSEMBLY

    Click here

  21. REMOVE VACUUM PUMP ASSEMBLY

    Click here

  22. REMOVE NO. 1 VACUUM PUMP BRACKET


    1. A002OHW

      Remove the 2 bolts, vacuum pump bracket and gasket.